NOVA BLANKET SMASH® – BLANKET REPAIRER

OVERVIEW

Nova Blanket Smash is designed to be applied to the rubber surface of offset printing blankets to affect a temporary repair of low spots and indentations.

PROPERTIES

• When applied to the surface of the blanket in the damaged areas, will cause the surface to return to its original level,
• Enabling the printer to finish his shift or complete a job.
• Nova Blanket Smash will notdamage to the printing surface

APPLICATION

• ldentify and clean the low spot on the blanket
• Apply Nova Blanket Smash to this area with the brush
• Leave Nova Blanket Smash on the bl anket for approximately 5 seconds, then wipe off with a dry cloth.
• lf the swelling recovery is insufficient, repeat steps 2&3

After treatment, wipe off any residue of Nova Blanket Smash to avoid a possibl e damage to the printing plate.

* The information on this technical data sheet is based on our general experience. The tests are carried out under controlled laboratory conditions. The information may change as conditions change. The performance of the product and the suitability of the print made depends on the printing conditions and the quality of the printed materials. For this reason, the statements in this document do not necessarily imply a performance guarantee for a particular application.